Home > Fire Retardant Sprays >

WT-103 Clear Coat Fire Retardant - 5 gallon
WT-103 Clear Coat Fire Retardant - 5 gallon


 
Our Price: $325.00


Product Code: WT103-5GAL
Qty:

Description
 
WT-103 is a Class B interior, intumescent, latex, clear, flat coating. Non-hazardous, non-toxic, non-carcinogenic formulation. Application over wood, fiberboard, plasterboard, cardboard, foliage and other decorative surfaces. This product works on many types of surfaces that require a clear, flat flame-retardant coating. Comes with documentation for fire marshal.
Features
Consistency of paint. Clear, flat coating. Apply two coats of WT-103 at the rate of 200 square feet per gallon. One gallon covers 100 square feet of useable product in two coats. Weight is 60 lbs. per 5-gallon pail. Store between 40°-80°F. Do not freeze. Closed containers exposed to heat may rupture due to pressure. Shelf life is two years if stored properly. Once container is opened, chemical must be used completely. Do not add water or change chemical composition in any way. May be tinted with any water-soluble dispersible tint. APPROVALS: California State Fire Marshal #C-10005, ASTM E84, Meets ANS No. 2.5, NFPA 255, UL No. 723, UBC 42.1 Previously Approved ICBO #3656 APPLICATION INSTRUCTIONS: Users of this product must determine the suitability of this product for its intended use. Prepare substrate by sanding and removing any silicone or oil based coating that may be on wood. WT-103 may not adhere to a surface that has not been properly prepared. Applicator must wear paint gloves, goggles and respirator. WT-103 must be mixed well. Apply WT-103 using an air, airless spray, brush or roller. Each gallon contains 100 square feet of usable product. Apply at the rate of 1 gallon per 200 square feet in two coats (1 gallon per 100 square feet). Cover all exposed areas. Allow first coat to completely dry before applying second coat. CLEAN-UP: WT-103 can be cleaned up with soap and water.

Share your knowledge of this product. Be the first to write a review »